MIL-E-24142/7E(I1) Enclosures, Submersible (15-Foot), Size 20 by 24
A-A-50552 - Fittings For Cable, Power, Electrical And Conduit, Metal, Flexible
This description covers box connectors for flexible conduit, armored cable, and nonmetallic sheathed cable, bushings for armored cable, couplings for flexible conduit, adapters for connecting flexible conduit to rigid conduit, and electrical metallic tubing, and clamps for grounding armored cable and ground wire.
A-A-50553 - Fitting For Conduit, Metal (Thick-Wall (Rigid) And Thin-Wall (Emt) Type)
This commercial item description (CID) covers rain tight, concrete tight, and miscellaneous fittings for rigid metal conduit and electrical metal tubing. This document does not cover fittings designed to meet the requirements of the National Electrical Code for use in hazardous locations or cast metal outlet bodies and floor boxes.
A-A-50563 - Conduit Outlet Boxes, Bodies, and Entrance Caps, Electrical: Cast Metal
This commercial item description (CID) establishes the government acquisition requirements for cast metal conduit outlet boxes, bodies, and entrance caps for use with threaded and threadless rigid conduit, intermediate metallic conduit, and electrical metallic conduit. Outlet boxes may be used as wire outlets or as mountings for lamp holders, rosettes, switches, convenience outlets, to enclose wire splices, for mounting or enclosing surface wiring offsets, pull boxes, and other functions in conduit runs. Entrance caps provide a weather resistant service entrance for wires.
A-A-52440 - Conduit, Metal, Flexible: Electrical Shielded
This CID covers shielded, electrical, flexible, metal conduit for use as protection of wiring in military vehicles from mechanical injury and, when properly installed and grounded, to prevent radiation that may cause interference with radio and other electronic equipment.
AN2553 - Plug & Fuel Nozzle Grounding (S/S By Ms25384)
AN3048 - (
Images) Ferrule-Conduit, Flexible, One Step, Synthetic Covered
AN3050 - ( Images) Ferrule And Conduit, Flexible
AN3051 - ( Images) Ferrule And Conduit, Flexible, One Step
AN3052 - ( Images) Ferrule And Conduit, Flexible, Two Step
AN3053 - ( Images) Ferrule And Rigid Conduit
AN3054 - ( Images) Nut, Coupling, Electrical Conduit
AN3055 - ( Images) Box, Connector, Electrical
AN3056 - ( Images) Adapter, Electrical Conduit, Rigid To Flexible
AN3058 - ( Images) Coupling, Electrical Conduit, Rigid
AN3059 - ( Images) Bushing - Electrical Conduit
AN3060 - ( Images) Elbow - Electrical Conduit, 45 Degrees
AN3061 - ( Images) Elbow - Electrical Conduit, 45 Degrees Junction Box
AN3062 - ( Images) Elbow - Electrical Conduit, 90 Degrees
AN3063 - ( Images) Elbow - Electrical Conduit, 90 Degrees Junction Box
AN3064 - ( Images) Box Connerctor, Electrical
AN3068 - ( Images) Coupling - Electrical Conduit
AN3069 - ( Images) Adapter Assembly - 3/16 Inch Conduit
AN3083 - ( Images) Ferrule - Conduit, Flexible, Two Step, Synthetic Covered
AN3104 - Elbow - Shielded Spark Plug (S/S By Mil-E-6719)
AN3111 - ( Images) Ring - Bonding, Electrical Connector (S/S By Mil-Dtl-32376)
AN3250 - ( Images) Coupling And Conduit Y
AN3420 - Bushing - Cable Adapter, Telescoping (S/S By Ms3420)
AN4028 - ( Images) Marker & Ignition Cable
AN6046 - ( Images) Bracket - Mounting, Extinguisher, Fire
AND10051 - ( Images) Hubs, Conduit Connection, Standard Dimensions (S/S By Sae-As10051)
AND10380 - ( Images) Coupling Installations, Standard Conduit, Electrical (S/S By Sae-As10380)
AND10391 - ( Images) Conduit Assembly-Flexible Metallic
EIA310 - Cabinets, Racks, Panels, And Associated Equipment
This section of the Standard establishes those dimensions which are soft metric conversions of the superseded EIA-310-C, and these dimensions are in millimeters.
FED-STD-128 - Junction Box, Extension, Junction Box, Cover, Junction Box, (Steel, Cadmium Or Zinc Coated)
FED-STD-156 - Fitting For Conduit Metal-Rigid, (Thick Wall And Thin Wall) Emt (Type)
FED-STD-157 - Fitting For Electrical Cable And Flexible Metal Conduit
HH-T-791 - Tube, Flexible, Nonmetallic, Electrical (S/S By Ul-3)
L-C-00740 - Conduct And Fittings, Plastic (S/S By W-C-1094)
L-C-740 - Conduit And Fittings, Plastic (S/S By W-C-1094)
MIL-A-2304 - Adapter-Scanning, Visual 400 Kilocycle Input
MIL-B-10256 - Bridle Rings Pf-73, Pf-74, Pf-75 And Pf-76
MIL-C-13909 - Conduit, Metal, Flexible: Electrical Shielded (S/S By A-A-52440)
This specification covers shielded, electrical, flexible metal conduit. The conduit consists of a core of flexible metal tubing with a covering of wire braid for use in military applications.
MIL-C-17277 - Clamp, Electric Cable (For Lighting Fixtures, Fittings And Enclosures Except Watertight) (Shipboard Use) (Use W-F-406)
MIL-C-172 - Cases; Bases, Mounting; And Mounts, Vibration (For Use With Electronic Equipment In Aircraft)
This specification covers cases, mounting bases, and vibration mounts used to enclose and isolate electronic equipment in aircraft from external vibrations. This specification establishes the general requirements and dimensions therof, defines the space limitations in aircraft therefor, and sets forth the performance and dimensional requirements thereof, in order to insure interchangeability.
MIL-C-19779 - Control Box, Junction (For Torpedo Mark 27 Mod 4)
MIL-C-23280 - Cabinet, Electrical Equipment, Cy-2675
MIL-C-23571 - Conduit And Conduit Fittings, Plastic, Rigid (S/S By W-C-1094)
MIL-C-23749 - Conduits, Vitrified Clay
MIL-C-24056 - Cabinet, Electronic Equipment, Cy-4516(A)/Cy-4516(B)/S (Single Bay) (Naval Shipboard Use) (S/S By Mil-C-28872)
MIL-C-24758/1 - Conduit, Flexible, Weatherproof (S/S By Mil-Prf-24758)
MIL-C-24758/10 - Conduit, Flexible, Weatherproof, Adapter For Triaxial Connectors (S/S By Mil-Prf-24758)
MIL-C-24758/11 - Conduit, Flexible, Weatherproof, Adapter For Coaxial Connectors (S/S By Mil-Prf-24758)
MIL-C-24758/12 - Conduit, Flexible, Weatherproof, Adapter For Mil-C-26482 Connectors (S/S By Mil-Prf-24758)
MIL-C-24758/13 - Conduit, Flexible, Weatherproof, Adapter For Ms3155-Type Connectors (S/S By Mil-Prf-24758)
MIL-C-24758/14 - Conduit, Flexible, Weatherproof, Adapter For Mil-C-28840 (Ec) Backshells (S/S By Mil-Prf-24758)
MIL-C-24758/15 - Conduit, Flexible, Weatherproof, Adapter For Mil-S-24235 Stuffing Tubes (S/S By Mil-Prf-24758)
MIL-C-24758/16 - Conduit, Flexible, Weatherproof, Adapter For Miscellaneous Threaded Fittings (S/S By Mil-Prf-24758)
MIL-C-24758/17 - Conduit, Flexible, Weatherproof, Adapter For Pipe Thread (Tapered) (S/S By Mil-Prf-24758)
MIL-C-24758/18 - Conduit, Flexible, Weatherproof, Adapter For Pipe Thread (Straight) (S/S By Mil-Prf-24758)
MIL-C-24758/19 - Conduit, Flexible, Weatherproof, Adapter For Panel Termination (S/S By Mil-Prf-24758)
MIL-C-24758/2 - Conduit, Flexible, Weatherproof, Straight Conduit Fitting (S/S By Mil-Prf-24758)
MIL-C-24758/3 - Conduit, Flexible, Weatherproof, 45 Degree Conduit Fitting (S/S By Mil-Prf-24758)
MIL-C-24758/4 - Conduit, Flexible, Weatherproof, 90 Degree Conduit Fitting (S/S By Mil-Prf-24758)
MIL-C-24758/5 - Conduit, Flexible, Weatherproof, Conduit-To-Panel Fitting (S/S By Mil-Prf-24758)
MIL-C-24758/6 - Conduit, Flexible, Weatherproof, Conduit-To-Pipe Externally Threaded (Tapered) Fitting (S/S By Mil-Prf-24758)
MIL-C-24758/7 - Conduit, Flexible, Weatherproof, Conduit-To-Stuffing Tube (Mil-S-24235) Fitting (S/S By Mil-Prf-24758)
MIL-C-24758/8 - Conduit, Flexible, Weatherproof, Conduit-To-Conduit Fitting (S/S By Mil-Prf-24758)
MIL-C-24758/9 - Conduit, Flexible, Weatherproof, Adapter For Mil-C-5015 Connectors (S/S By Mil-Prf-24758)
MIL-C-2798 - Caps, Attachment-Plug, Separable, For Connection To Flexible Electrical Conductors (Use W-C-596)
MIL-C-28794 - Cabinet, Electronic Equipment (Single Bay)
This specification covers the functional requirements of a single bay electronic equipment cabinet to house electronic equipment in a shipboard environment.
MIL-C-28872 - Cabinet, Electronic Equipment Cy-4516C/S ()
MIL-C-29169 - Conduit, And Conduit Fittings, Metal, Rigid, Polyvinyl Chloride (Pvc) Coated (S/S By Ul 6 And Ul514A)
This specification covers electrical conduit and conduit fittings, metal, rigid, polyvinyl chloride (PVC) coated, for use in corrosive environments.
MIL-C-46867 - Compound, Caulking, Conductive
MIL-C-55172 - Cabinet, Electrical Equipment, Cy-3397( )/G
MIL-C-5620 - Control Box, C-157/Ap (For Use With As-168/Ap Antenna-Rectifier)
MIL-C-6136 - Conduit: Electrical, Flexible, Shielded, Aluminum Alloy For Aircraft Installations (Use Sae-As6136)
This specification covers the requirements for shielded electrical conduit for aircraft installations.
MIL-C-7763 - Clamp-Strap Type, Electric Wire
MIL-C-7931 - Conduit, Electrical, Flexible, Radio Frequency Shielding, For Aircraft Installations
MIL-C-82079 - Clamp, Electrical, Nonconductive, (Use Mil-H-55053)
MIL-C-82597 - Compound, Electrically Conductive
This specification covers the requirements for procurement of a special purpose, electrically conductive compound for use with certain underwater ordnance.
MIL-DTL-24705/1 - Penetrators, Multiple Cable, Electric Cable, Rectangular Metal Frame, Square-Faced Blocks
MIL-DTL-24705/3 - Penetrators, Multiple Cable, Electric Cables, Round Frame, Square-Faced Blocks
MIL-DTL-24705 - Penetrators, Multiple Cable, Electric Cable, General Specification For
This specification covers multiple cable penetrator frames (see 6.4.5), accessories, and insert material items (see 6.4.6) for sealing electric cable passing through decks, bulkheads, and electrical equipment on Naval ships.
MIL-DTL-24749 - Grounding Straps And Bosses, Electromagnetic
This specification covers the general requirements and tests for MIL-STD-1310 electrical grounding straps and welding studs, hereafter identified as bond straps and bosses.
MIL-E-24142/10 - ( Images) Enclosure For Electrical Fittings And Fixtures Submersible (15-Foot), Size 2-1/8 By 4-1/2
MIL-E-24142/11 - ( Images) Enclosures-Plastic, Submersible, (15-Foot) 3 And 4 - Inches Round, Grounded
MIL-E-24142/12 - ( Images) Enclosures-Plastic, Submersible, (15-Foot) 3-Inches Round, Grounded
MIL-E-24142/13 - ( Images) Enclosure-Plastic, Submersible, (15-Foot) 4-Inches Round, Grounded
MIL-E-24142/14 - ( Images) Enclosure, Single Cover, Sizes 10 By 10 Through 12 By 12, Totally Enclosed, Nonwatertight
MIL-E-24142/15 - ( Images) Enclosure, With Fuse Cover, Sizes 10 By 10 Through 12 By 12, Totally Enclosed, Nonwatertight
MIL-E-24142/16 - ( Images) Enclosure, Single Cover, Sizes 10 By 14 Through 12 By 20, Totally Enclosed, Nonwatertight
MIL-E-24142/17 - ( Images) Enclosure With Fuse Cover, Sizes 10 By 14 Through 12 By 20, Totally Enclosed, Nonwatertight
MIL-E-24142/18 - ( Images) Enclosures, Single Cover, Sizes 10 By 20 Through 18 By 22, Totally Enclosed, Nonwatertight
MIL-E-24142/19 - ( Images) Enclosure, With Fuse Cover, Size 10 By 20 Through 12 By 22, Totally Enclosed, Nonwatertight
MIL-E-24142/1 - ( Images) Enclosure For Electrical Fittings And Fixtures, Submersible, Size 4 By 4 (15-Foot)
MIL-E-24142/20 - ( Images) Enclosures, With Fuse Cover, Size 10 By 20, Through 12 By 22, Totally Enclosed, Nonwatertight
MIL-E-24142/2 - ( Images) Enclosure For Electrical Fittings And Fixtures, Submersible (15-Foot), Size 3 By 5
MIL-E-24142/3 - ( Images) Enclosure For Electrical Fittings And Fixtures, Submersible, Size 6 By 9 (15-Foot)
MIL-E-24142/4 - ( Images) Enclosure, Submersible (15-Foot) Size 4 By 7
MIL-E-24142/5 - ( Images) Enclosure For Electrical Fittings And Fixtures, Submersible, (15-Foot), Sizes 3R, 4R And 5R
MIL-E-24142/6 - ( Images) Enclosure, Submersible (15-Foot), Sizes 8 By 10 And Through 14 By 26
MIL-E-24142/7 - ( Images) Enclosures, Submersible (15-Foot), Size 20 By 24
MIL-E-24142/8 - ( Images) Enclosure, Totally Enclosed, Size 2-1/4 By 2-7/8 (Octagon), Nonwatertight
MIL-E-24142/9 - ( Images) Enclosure For Electrical Fittings And Fixtures, Submersible (15-Foot), Size 2-1/8 By 3
MIL-E-24142 - Enclosure For Electrical Fittings And Fixtures, General Specification For
This specification covers the general requirements for enclosures for electrical fittings and fixtures used on Naval ships.
MIL-E-24743 - ( Images) Enclosure, Common Electronic Equipment, General Specification For
This specification establishes the requirements for the design, manufacture and testing of a water-cooled, common electronic equipment enclosure (CE 3) for shipboard use within sheltered equipment spaces.
MIL-F-28675 - Fittings, Conduit, Explosion Proof (Couplings, Seals, Unions, Elbows)
This specification covers explosion-proof electrical conduit fittings including conduit seals, flexible couplings, reducers, unions, drain and breather valves, inspection seals, drain seals, and elbows.
MIL-H-19320 - Hooks, Guy, Hangers, Cable, And Steps, Pole (Use Mil-H-55053 Or Mil-S-3960)
MIL-H-19352 - Hanger, Cable
MIL-H-21367/1 - Hull Fitting, Stuffing Tube, Type Mx8208/U For Flexible, Solid Dielectric, Radio Frequency Cable
MIL-H-21367/10 - Hull Fittings, Stuffing Tube, Type Mx2327/U (Long Body), For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/11 - Hull Fitting, Stuffing Tube, Type Mx2326/U For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/12 - Hull Fitting, Stuffing Tube, Type Mx2326/U (Long Body) For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/13 - Hull Fitting, Stuffing Tube, Type Mx2646/U For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/14 - Hull Fitting, Stuffing Tube, Type Mx2646/U (Long Body), For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/17 - Hull Fitting, Blanking Plugs For Stuffing Tubes Mx2326/U, Ms2327/U, And Mx2646/U, For Flexible Solid-Dielectric Radio-Frequency Cable
MIL-H-21367/18 - Hull Fitting, Blanking Plugs For Stuffing Tube Mx7637/U For Flexible Solid-Dielectric Radio-Frequency Cable
MIL-H-21367/2 - Hull Fitting, Stuffing Tube, Type Mx8209/U For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/3 - Hull Fitting, Stuffing Tube, Type Mx8210/U For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/4 - Hull Fitting, Stuffing Tube, Type Mx8211/U, For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/5 - Hull Fitting, Stuffing Tube, Type Mx8212/U, For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/6 - Hull Fitting, Stuffing Tube, Type Mx8213/U, For Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/7 - Hull Fitting, Stuffing Tube, Type Mx7637/U For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/8 - Hull Fittings, Stuffing Tube, Type Mx7637/U, Long Body, For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-21367/9 - Hull Fittings, Stuffing Tube, Type Mx2327/U For Flexible, Solid-Dielectric, Radio-Frequency Cable
MIL-H-55053 - Hardware, Pole Line
MIL-I-24728/3 - Interconnection Box, Fiber Optic,, Submersible, 406.4 X 863.6 Mm
MIL-I-24728/4 - Interconnection Box, Fiber Optic, Submersible, 101.6 X 177.8 Mm
MIL-I-24728/5 - Interconnection Box, Fiber Optic, Submersible, 152.4 X 228.6 Mm
MIL-I-24728/6 - Interconnection Box, Fiber Optic, Connector Patch Panel Module
MIL-I-24728/7 - Interconnection Box, Fiber Optic, Splice Tray Holder Module
MIL-J-19416 - Junction Box Mark 41 Mod 0
MIL-J-21978 - Junction Boxes, Surface, Cabinet Type, Hinged Cover (S/S By Ul50)
MIL-J-23013 - Junction Box Jeu-25 (*)/A
MIL-J-5094 - Junction Boxes, Power (P-3 Compass)
MIL-K-15836 - Kit, Splicing, Naval Standard Cable (For Harbor Defense)
MIL-L-12293 - Light, Extension
MIL-O-23641 - Outlet, Shore Power
MIL-P-24705/2 - Penetrators, Multiple Cable, For Electric Cables, Notched Rectangular Metal Frame, For Rectangular-Faced Blocks
MIL-PRF-24758 - Conduit Systems, Flexible, Weatherproof
This specification covers the performance requirements for weatherproof flexible conduit systems (see 6.3.12) for use primarily in exposed areas (see 6.3.10) on U.S. Navy ships, to shield against electromagnetic (EM) radiation from own-ship transmitters and emissions external to the ship, electromagnetic pulse (EMP) (see 6.3.8) events, and to minimize corrosion (see 6.3.6) while being field repairable to reduce maintenance.
MIL-PRF-85725 - Rack, Integrated Avionics, Forced Air Cooled, General Specification For
This specification covers forced-air-cooled, integrated avionics racks, herein after referred to as racks, used for various military avionics systems. The racks are designed to accommodate Standard Electronic Modules (SEMs) using multiple tiers.
MIL-PRF-85726 - Enclosure, Standard Avionics, Forced Air-Cooled, Specification For
This specification covers forced air-cooled standard avionics enclosures, hereinafter referred to as enclosures. The enclosures accommodate Standard Electronic Modules (SEMs) Format B Span 2, Format C, and Format E, and a standard backplane.
MIL-R-10964 - Racks, Electrical Equipment (Rack Mt-452( )/F And Rack Mt-453( )/F)
This specification covers the requirements for prewired steel racks designed to provide mounting facilities for standard 19 inch wide electrical panel equipment.
MIL-R-11461 - Rod, Ground (With Attachments) (S/S By W-R-550)
MIL-R-12537 - Rack, Electrical Equipment Mt-1278( )/U
MIL-R-12644 - Rod, Ground, Mx-148/G, General Specification For (Use W-R-550)
MIL-R-18292 - Rack, Electrical Equipment, Mt-1589/Grc-27A
MIL-R-24006 - Rods, Ground, Copper-Clad Steel, Galvanized Steel, And Copper (Use W-R-550)
MIL-R-46837 - Raceways, Steel, Rigid
This specification covers the requirements for rigid steel raceway conduits which consist of a base and cover so formed as to distinguish raceways from metallic tubular conduits.
MIL-S-19622/10 - Stuffing Tube, Nylon: Cap
MIL-S-19622/11 - Stuffing Tube, Nylon: Washer, Nonmetallic Slip
MIL-S-19622/12 - Stuffing Tube, Nylon: Washer, Nonmetallic Retainer
MIL-S-19622/13 - Stuffing Tube, Nylon: Bushing, Neoprene
MIL-S-19622/14 - Stuffing Tube, Nylon: Plug, Neoprene
MIL-S-19622/15 - Stuffing Tube, Nylon: Locknut, 90 Degrees
MIL-S-19622/1 - Stuffing Tubes, Straight, Nylon
MIL-S-19622/2 - Stuffing Tubes, 90 Degrees, Nylon
MIL-S-19622/3 - Stuffing Tubes, Npt, Nylon
MIL-S-19622/4 - Stuffing Tubes, "Y"-Type Nylon
MIL-S-19622/5 - Stuffing Tube, Nylon: Body, Straight
MIL-S-19622/6 - Stuffing Tube, Nylon: Body, 90 Degrees
MIL-S-19622/7 - Stuffing Tube, Nylon: Body, Npt
MIL-S-19622/8 - Stuffing Tube, Nylon: Body, "Y" Type
MIL-S-19622/9 - Stuffing Tube, Nylon: Locknut, Straight Body
MIL-S-19622 - Stuffing Tubes, Nylon; And Packing Assemblies; General Specification For
This specification covers the general requirements for nylon stuffing tubes for shipboard electrical cables, which include tube types suitable for both thin wall enclosures up to 3/16-inch thick and wall enclosures of 3/16 to 3/4-inch thick.
MIL-S-21953 - Sealing Kit For Preservation Of Ends Of Disconnected Cables
This specification covers a sealing kit used to supply heat sealed polyethylene boots on disconnected and unused ends of electrical cables to serve as a guard against the entry of moisture, tools used in preparing cable ends for sealing, and the consumable materials used in making end seals.
MIL-S-2244 - Sleeve, Wire Splicing, Single Tube, General Specification For
MIL-S-23190/2 - Straps, Clamps, Plastic And Metal, And Mounting Hardware, Plastic For Cable Harness Tying And Support Clamp, Loop, Metal, Cushioned, Adjustable, Wire Support, Type V, Class 1 (S/S By Sae-As23190/2)
MIL-S-23190/3 - Strap, Clamps, And Mounting Hardware, Plastic And Metal For Cable Harness Tying And Support Strap, Tie Down, Adjustable, Corrosion Resistant Steel Type Vi, Class 1 (S/S By Sae-As23190/3)
MIL-S-23190 - Straps, Clamps, And Mounting Hardware, Plastic And Metal For Cable Harness Tying And Support (S/S By Sae-As23190)
This specification covers a series of plastic and metal components and devices used for the tying and support of cable, cable assemblies and wire in electrical, electronic and communications equipment, and in interconnection systems.
MIL-S-24235/10 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Steel, For Decks And Bulkheads Without Pipe Protection
MIL-S-24235/11 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Outlet, Weather Deck, Nonmagnetic
MIL-S-24235/12 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Split
MIL-S-24235/13 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, For Cast Enclosures
MIL-S-24235/14 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, For Sheet Metal Enclosures
MIL-S-24235/15 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Fitters For
MIL-S-24235/16 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Cable, Shearing Valve, Hull, Pressureproof, Symbols 512, 512.1, 513, And 513.1
MIL-S-24235/17 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Swage Type, Steel And Aluminum, For Deck And Bulkheads With Pipe Protection
MIL-S-24235/1 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Bulkhead, Pressureproof
MIL-S-24235/2 - Stuffing Tube, Packing Assemblies For Pressureproof Bulkhead
MIL-S-24235/3 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Bulkhead, For Ballast Tanks
MIL-S-24235/4 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Packing Assemblies For Bulkhead (Ballast Tanks)
MIL-S-24235/5 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Ballast Tank
MIL-S-24235/6 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Packing Assemblies For Ballast Tank
MIL-S-24235/7 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, For Cast Enclosures, Pressureproof
MIL-S-24235/8 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, For Sheet Metal Enclosures, Pressureproof
MIL-S-24235/9 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, Brass And Steel, For Decks And Bulkheads With Pipe Protection
MIL-S-24235 - Stuffing Tubes, Metal, And Packing Assemblies For Electric Cables, General Specification For
This specification covers metal stuffing tubes for passing electrical cables through decks and bulkheads and entering enclosed equipment on Naval ships and packing assemblies for stuffing tubes.
MIL-S-24700 - Stuffing Tubes For Reference Electrodes, Impressed Current Cathodic Protection (Metric)
MIL-S-55094 - Stake, Guy And Other Hardware For Antenna Masts
MIL-STD-189 - Rack, Electrical Equipment 19 Inch & Associated Equipment (See Notice 3 For Replacement Information)
MIL-STD-2200 - Requirements For Employing Standard Enclosure Systems
This standard addresses the requirements for the implementation of Standard Enclosure Systems(SES) hardware in the design and construction of military electronic systems.
MIL-T-81914 - Tubing, Plastic, Flexible, Convoluted, Conduit General Specification For (S/S By Sae-As81914)
This specification establishes requirements for plastic convoluted tubing that provides mechanical protection and support for electric wire bundles.
MIL-T-81914/1 - Tubing, Plastic, Flexible, Convoluted, Polytetrafluoroethylene, Standard Convolutions (S/S By Sae-As81914/1)
MIL-T-81914/2 - Tubing, Plastic, Extra Flexible, Convoluted, Polytetrafluorethylene Close Convolution (S/S By Sae-As81914/2)
MIL-T-81914/3 - Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Standard Convolution (S/S By Sae-As81914/3)
MIL-T-81914/4 - Tubing, Plastic, Extra Flexible, Convoluted, Fluorinated Ethylene Propylene, Close Convolution (S/S By Sae-As81914/4)
MIL-T-81914/5 - Tubing, Plastic, Extra Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Close Convolution (S/S By Sae-As81914/5)
MIL-T-81914/6 - Tubing, Plastic, Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Standard Convolution (S/S By Sae-As81914/6)
MIL-T-81914/7 - Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Integral Braid (S/S By Sae-As81914/7)
MIL-W-21621 - Wiring Fixtures For Electrical And Electronic Equipment
MS14125 - ( Images) Rack, Vertical
MS14126 - Rack, Turret Projected Top
MS14127 - ( Images) Door, Face Mounted
MS14128 - ( Images) Door, Flush Mounted
MS14129 - ( Images) Panel, Plush Mounted
MS14130 - ( Images) Writing Desk
MS14131 - ( Images) Writing Desk Components
MS14132 - ( Images) Panel Textolite
MS14133 - ( Images) Drawer, Sliding
MS14134 - ( Images) Slide Assembly, Equipment
MS14135 - ( Images) Drawer Assembly, Rack Mounting
MS14136 - ( Images) Handle
MS14137 - ( Images) Angle, Mounting
MS14138 - ( Images) Shelf
MS14139 - ( Images) Knee Protector
MS14140 - ( Images) Plate-Rack
MS16155 - Stuffing Tube, Nylon, Size 1
MS16156 - Stuffing Tube, Nylon, Size 2
MS16157 - Stuffing Tube, Nylon, Size 4T
MS16158 - Stuffing Tube, Nylon, Size 5
MS16159 - Stuffing Tube, Nylon, Size 6
MS16160 - Stuffing Tube, Nylon, Size 7
MS16161 - Stuffing Tube, Nylon, Size 8
MS16162 - Stuffing Tube, Nylon, Size 9
MS16163 - Stuffing Tube, Nylon, 90 Degree, Size 1
MS16164 - Stuffing Tube, Nylon, 90 Degree, Size 2
MS16165 - Stuffing Tube, Nylon, 90 Degree, Size 4T
MS16166 - Stuffing Tube, Nylon, 90 Degree, Size 5
MS16167 - Stuffing Tube, Nylon, 90 Degree, Size 6
MS16168 - Body, Nylon Stuffing Tube (S/S By Mil-S-19622/5)
MS16169 - Locknut, Nylon Stuffing Tube (S/S By Mil-S-19622/9)
MS16170 - Cap, Nylon Stuffing Tube
MS16173 - Plug, Neoprene, Nylon Stuffing Tube
MS16174 - Bushing, Neoprene, Nylon Stuffing Tube
MS16175 - Body, Nylon Stuffing Tube, 90 Deg.
MS16176 - Locknut, Nylon Stuffing Tube, 90 Degrees
MS16177 - Packing Assemblies For Nylon Stuffing Tube, Size 1 (S/S By Mil-S-19622/16)
MS16178 - ( Images) Packing Assemblies For Nylon Stuffing Tube, Size 2
MS16179 - Packing Assemblies For Nylon Stuffing Tube, Size 4 And 4T (S/S By Mil-S-19622/19)
MS16189 - Packing Assemblies For Nylon Stuffing Tube, Size 5 (S/S By Mil-S-19622/20)
MS16190 - Packing Assemblies For Nylon Stuffing Tube, Size 6 (S/S By Mil-S-19622/21)
MS16191 - Packing Assemblies For Nylon Stuffing Tube, Size 7 (S/S By Mil-S-19622/22)
MS16192 - Packing Assemblies For Nylon Stuffing Tube, Size 8 (S/S By Mil-S-19622/23)
MS16193 - Packing Assemblies For Nylon Stuffing Tube, Size 9 (S/S By Mil-S-19622/24)
MS17013 - Terminal, Electric (Hermetic Seal), Single Conductor, Awg 14/1
MS17014 - Sleeve For Electric Terminals (Hermetic Seal)
MS17015 - Tube For Electric Terminal (Hermetic Seal)
MS17016 - ( Images) Bushings For Electric Terminals (Hermetic Seal)
MS17017 - Terminal, Electric (Hermetic Seal), Single Conductor, Awg 10/1
MS17018 - Terminal, Electric (Hermetic Seal), Single Conductor, Awg 4/0
MS17019 - Terminal, Electric (Hermetic Seal), Tubular Heater, 1000-Volt
MS17020 - Terminal, Electric (Hermetic Seal), 2-Conductor, Awg 14/2
MS17021 - ( Images) Adapters For Electric Terminals (Hermetic Seal)
MS17022 - Terminal, Electric (Hermetic Seal), 3-Conductor Awg 14/3
MS17023 - Terminal, Electric (Hermetic Seal), 4-Conductor, Awg 14/4
MS17024 - Terminal, Electric (Hermetic Seal), 7-Conductor, Awg 14/7
MS17025 - Terminal, Electric (Hermetic Seal), 2-Conductor, Awg 8/2
MS17026 - ( Images) Fitter Assembly For Electrical Terminal (Hermetic Seal), Size Awg 14/1
MS17027 - ( Images) Fitter Assembly For Electrical Terminal (Hermetic Seal), Size Awg 10/1
MS17028 - ( Images) Fitter Assembly For Electric Terminal (Hermetic Seal), Size Awg 4/0
MS17029 - ( Images) Fitter Assembly For Electric Terminal (Hermetic Seal), Size Awg 14/2
MS17030 - ( Images) Fitter Assembly For Electric Terminal (Hermetic Seal), Awg 14/3
MS17031 - ( Images) Fitter Assembly For Electric Terminal (Hermetic Seal), Size Awg 14/4
MS17032 - ( Images) Fitter Assembly For Electric Terminal (Hermetic Seal), Size Awg 14/7
MS17033 - ( Images) Fitter Assembly For Electric Terminal (Hermetic Seal), Size Awg 8/2
MS17034 - ( Images) Fitters For Single Conductor Electric Terminal (Hermetic Seal) Fitter Assemblies
MS17035 - ( Images) Fitters For Multiple Conductor Electric Terminal (Hermetic Seal) Fitter Assemblies
MS17036 - ( Images) Gland Nuts For Electric Terminal (Hermetic Seal) Fitter Assemblies
MS17037 - ( Images) Ferrule For Electric Terminal (Hermetic Seal) Fitter Assemblies
MS17039 - Stuffing Tube, Npt, Nylon, Size 1
MS17040 - Stuffing Tube, Npt, Nylon, Size 2
MS17041 - Stuffing Tube, Npt, Nylon, Size 4T
MS17042 - Stuffing Tube, Npt, Nylon, Size 5
MS17043 - Stuffing Tube, Npt, Nylon, Size 6
MS17044 - Stuffing Tube, Npt, Nylon, Size 7
MS17045 - Stuffing Tube, Npt, Nylon, Size 8
MS17046 - Stuffing Tube, Npt, Nylon, Size 9
MS17047 - Body, Npt Nylon Stuffing Tube (S/S By Mil-S-19622/7)
MS17234 - ( Images) Enclosure, 4 Inch For Elec Fittings And Lighting Fixtures
MS17270 - Stuffing Tube, Nylon, Size 3 (Use Mil-S-19622/1)
MS17271 - Stuffing Tube, Nylon, 90 Degree, Size 3
MS17272 - Packing Assemblies For Nylon Stuffing Tube, Size 3 (S/S By Mil-S-19622/18)
MS17273 - Stuffing Tube, Npt, Nylon Size 3
MS17339 - ( Images) Cable, Safety (Wire Rope)
MS17821 - Strap, Cable, Adjustable, Self Clinching, Plastic, Type I, Class 1 (Use Ms 3367)
MS17822 - Strap, Cable, Identification, Adjustable, Self-Clinching Plastic, Type Ii, Class 1 (Use Ms3368)
MS17848 - ( Images) Enclosure, 5 Inch For Elec Fittings And Lighting Fixtures
MS25064 - ( Images) Conduit, Flexible, Radio Frequency Shielding (S/S By Sae-As25064)
MS25065 - ( Images) Ferrule, Flexible Conduit, Radio Frequency Shielding (S/S By Sae-As25065)
MS25066 - ( Images) Nut, Flexible Conduit, Radio Frequency Shielding (S/S By Sae-As25066)
MS25067 - ( Images) Conduit Assembly, Flexible, Radio Frequency Shielding (S/S By Sae-As25067)
MS25171 - ( Images) Nipple, Electrical Terminal (Asg) (S/S By A-A-59178)
MS25425 - Chassis, Modular Plug-In, For Electronic Modules
MS28108 - Junction Box, Power (P-3 Compass)
MS3339 - ( Images) Plate, Mounting, Plastic For Use With Ms6637 Plastic Tiedown Straps (S/S By Sae-As33391)
MS3340 - ( Images) Bulkhead Bracket, For Use With Ms3367 Plastic Tiedown Straps (S/S By Sae-As33401)
MS3341 - ( Images) Bracket, Mounting, Plastic For Use With Ms3367 Plastic Tier Down Straps (S/S By Sae-As33411)
MS3367 - ( Images) Strap, Tiedown, Electrical Components, Adjustable, Self Clinching, Plastic, Type I, Class 1 (S/S By Sae-As33671)
MS3368 - ( Images) Strap, Tiedown, Electrical Components, Identification, Adjustable, Self Clinching, Plastic, Type Ii, Class 1 (S/S By Sae-As33681)
MS3503 - ( Images) Rack, Module, Test Equipment
MS35762 - ( Images) Collar, Cable
MS39015 - ( Images) Elbow, Electrical Conduit: With Insulator, Spark Plug Cable (Other Than Aircraft)
MS39016 - ( Images) Nut, Coupling, Electrical Conduit Spark Plug Cable (Other Than Aircraft)
MS39017 - ( Images) Ferrule, Electrical Conduit: Spark Plug Cable Elbow (Other Than Aircraft)
MS39018 - ( Images) Ferrule, Electrical Conduit: Spark Plug Cable (Other Than Aircraft)
MS39019 - ( Images) Elbow, Electrical Conduit: Spark Plug Cable (Other Than Aircraft)
MS39024 - ( Images) Brace, Crossarm, Back (Pole Line)
MS39025 - Bracket, Insulator Transposition, Crossarm
MS39026 - ( Images) Hanger, Cable (Pole Line)
MS39027 - ( Images) Link, Reinforcing, Cable (Pole Line)
MS39028 - Adapter, Thimble Lead Thread
MS39029 - Brace, Crossarm, Wood
MS39030 - ( Images) Brace, Crossarm, Flat (Pole Line)
MS39031 - ( Images) Clamp, Dropwire Electrical Conductor, Strain (Pole Line)
MS39032 - ( Images) Clamp, Cable Suspension (Pole Line)
MS39033 - Hanger, Wire Strand (One Hole)
MS39034 - Brace, Crossarm, Vertical
MS39035 - Bracket, Insulator (Transposition, Span)
MS39036 - Hanger, Wirestrand Grade Clamp (Pol Line)
MS39037 - ( Images) Strand Connector, Pole (Pole Line)
MS39038 - ( Images) Strap, Support Wire Strand Hanger (Pole Line)
MS39039 - Guy Attachment, Strap
MS39040 - ( Images) Bridle Ring (Pole Line)
MS39041 - Clamp, Electrical Strand, Ground (Pole Line)
MS39042 - ( Images) Pin, Insulator Lead Thread (Pole Line)
MS39043 - ( Images) Bracket, Insulator, Steel (Pole Line)
MS39044 - Brace, Crossarm, Vertical Communications Type
MS39045 - ( Images) Drive Ring (Pole Line)
MS39046 - ( Images) Clamp, Electrical, Lashing (Pole Line)
MS39047 - ( Images) Step, Pole, Detachable
MS39048 - Bracket, Insulator, Transposition (Phantom Circuit)
MS39049 - ( Images) Step, Pole, Steel, Drive
MS39050 - Bracket, Insulator, Transposition
MS39051 - ( Images) Hanger, Wire Strand For Angle Use, Three Holes (Pole Line)
MS39052 - Bracket, Insulator (Dead End)
MS39053 - Hanger, Wire Strand Hot Dip Galvanized
MS39054 - Brace, Crossarm, Side (Without Step)
MS39055 - Pin, Insulator, Separable Tip
MS39072 - Box Connector, Electrical, 90 Deg. (Use An 3063)
MS39073 - Adapter, Electrical Conduit (Use An-3055)
MS39074 - Box Connector, Electrical (S/S By An3064)
MS39075 - Ferrule, Electrical Conduit, Flexible (Use An-3050)
MS39076 - Ferrule, Electrical Conduit, Flexible, One Step (Use An-3051)
MS39077 - Ferrule, Electrical Conduit, Flexible, Two Step (Use An-3052)
MS39078 - Nut, Coupling, Electrical Conduit (Use An3054)
MS39079 - Adapter, Electrical Conduit, Rigid To Flexible (Use An3056)
MS39080 - Coupling, Electrical Conduit, Rigid (Use An3058)
MS39081 - Nut, Coupling, Electrical Conduit, Plain, Hexagon (Use An3066)
MS75011 - ( Images) Clevis, Mast Holder
MS75012 - ( Images) Holder, Mast (Mast Base Ab-154/U)
MS75013 - ( Images) Pin, Straight, Headless
MS75014 - ( Images) Stake, Guy, Antenna (Stake Gp-2)
MS75015 - ( Images) Stake, Guy, Antenna (Stake Gp-101/U)
MS75016 - ( Images) Stake, Guy, Antenna (Guy Stake Gp-108/U)
MS75017 - ( Images) Stake, Guy, Antenna (Guy Stake Gp-111/G)
MS75019 - ( Images) Stake, Guy, Antenna
MS75022 - ( Images) Bends, Electrical Conduit 90 Degree And 45 Degree Zinc-Coated Std Thk-Wall Steel (S/S By Ul6)
MS75023 - ( Images) Bend, Electrical Conduit, 90 Deg. And 45 Deg. Zinc Coated Thin-Wall Steel (Emt) (S/S By Ul797)
MS90494 - Pin, Insulator Lag Screw Type, Lead Insulator Thread (S/S By Mil-H-55053)
MS90498 - Clamp, Dead End Strain
MS91402 - ( Images) Case, Small-Size (For Use With Electronic Equipment In Aircraft)
MS91403 - ( Images) Case, Large-Size (For Use With Electronic Equipment In Aircraft)
MS91404 - ( Images) Base, Mounting, Small-Size (For Use With Electronic Equipment In Aircraft)
MS91405 - ( Images) Base, Mounting, Large-Size (For Use With Electronic Equipment In Aircraft)
MS91601 - Bushing, Electrical Conductor, Series Lc Connectors
MS91605 - Bushing, Electrical Conductor, Series Lc Connector
MS91606 - Bushing, Electrical Conductor, Series Lc Connectors
NEMA-BU1 - Busways (S/S By Ul857)
Provides ratings, testing standards, and application information for busways (and accessories) for distribution of power at 600 volts or less.
NEMA-FB1 - Fittings, Cast Metal Boxes, And Conduit Bodies For Conduit And Cable Assemblies
Applies to materials, construction, and performance of fittings, cast metal boxes, and condit bodies used with round raceway systems and/or cable assemblies that distribute power in an electrical system as defined in the National Electrical Code under Section 90-2, Scope. Provides practical information concerning construction, test, performance, and manufacture of fittings, cast metal bxes, and conduit bodies for conduit and cable assemblies.
NEMA-OS1 - Sheet-Steel Outlet Boxes, Device Boxes, Covers, And Box Supports
This Standards Publication covers those general-purpose metal outlet boxes, device boxes, covers, and supports that are widely used by the consumer.
NEMA-RN1 - Steel Conduit And Intermediate Metal Conduit Galvanized Rigid Polyvinyl-Chloride (Pvc) Externally Coated
NEMA-TC13 - Electrical Nonmetallic Tubing (Ent)
These standards cover electrical nonmetallic tubing (ENT) made from polyvinal chloride (PVC).
NEMA-TC14 - Fittings And Filament-Wound Reinforced Thermosetting Resing Conduit
This standard covers conduit employing filament wound reinforced thermosetting resins as defined in 1.2.2 and 1.2.3.
NEMA-TC2 - Electrical Polyvinyl Chloride (Pvc) Tubing And Conduit
Covers electrical polyvinyl chloride (PVC) conduit of types EPC-40- -designed for normal-duty applications above ground and concrete encased applications or direct burial- -and EPC-80- -designed for heavy-duty (areas of physical damage) applications above ground and concrete encased applications or direct burial.
NEMA-TC3 - Fittings, Pvc For Use With Rigid Pvc Conduit & Tubing
These standards cover PVC plastic fittings intended to be joined in the field by means of a solvent cement system to PVC rigid conduit, tubing, duct, and other fittings, based on the outside diameters given in NEMA Standards, Publication No. TC 2-1990.
NEMA-TC6 - Pvc And Abs Plastic Utilities Duct For Underground Installation
These standards cover the following types of PVC and ABS plastic utilities duct for uner-ground installation for communication and electrical wire and cable: Type EB - designed for encased burial in concrete when instlled in trenches under-ground, and Type DB - designed for direct burial in trenches underground without a requirement for encasement in concrete.
NEMA-TC9 - Fittings For Abs And Pvc Plastic Utilities Duct For Underground In- Sallation
Fittings for ABS and PVC Plastic Utilities Duct for Underground Installation
NEMA-VE1 - Cable Tray Systems, Metal
Specifies the requirements for metal cable trays and associated fittings designed for use in accordance with the rules of the Canadian Electrical Code, Part I, and the National Electrical Code.
QPL-13909-11 - Conduit, Metal, Flexible, Electrical, Shielded
QPL-172-21 - Cases; Bases, Mounting; And Mounts, Vibration (For Use With Electronic Equipment In Aircraft)
QPL-23190-40 - Straps, Clamps, And Mounting Hardware, Plastic And Metal For Cable Harness Tying And Support (S/S By Qpl-As23190)
QPL-24705-7 - Penetrators, Multiple Cable For Electric Cables, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-7763-1 - Clamp-Strap Type, Electric Wire
QPL-7931-7 - Conduit, Electrical, Flexible, Radio Frequency Shielding, For Aircraft Installations
UL209 - Metal, Cellular Floor Raceways And Fittings
These requirements cover cellular metal floor raceway systems intended to be installed as an integral part of the building structure and constructed for the installation of wires and cables in accordance with the National Electrical Code.
UL3 - Tubing, Flexible Nonmetallic For Electric Wiring, Safety For
These requirements cover woven flexible nonmetallic tubing (fiber loom) to be employed as mechanical protection for insulated wires in accordance with the National Electrical Code.
UL360 - Conduit, Steel, Liquid-Tight Flexible
These requirements cover the 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, and 4 inch tradesizes of liquid-tight flexible steel conduit.
UL514 - Boxes, Metallic Outlet
This standard applies to metallic outlet boxes, flush-device boxes, floor boxes, concrete boxes, extension rings, covers, conduit bodies, bar hangers, bar-hanger assemblies, and all accessories whose principal funtion is for support of boxes.
UL514 - Boxes, Nonmetallic Outlet, Flush Device Boxes, & Covers
These requirements cover nonmetallic outlet boxes, conduit bodies, flush-device boxes, extension rings, covers, floor oxes, floor nozzles, concrete boxes, and flush-device cover plates to be employed in accordance with the National Electrical Code.
UL651 - Conduit & Hope Conduit, Type Eb & A Rigid Pvc, Standard For
These requirements cover: Type EB and Type A extruded rigid PVC (polyvinyl chloride) electrical conduit and fittings consisting of elbows and other bends made from and for use with these types of conduit. Extruded rigid Schedule 40 high-density PE (polyethylene) electrical conduit and the following fittings: Elbows and other bends from and for use with this conduit and Rigid high-density PE couplings for use with this conduit.
UL845 - Motor Control Centers
These requirements cover motor control centers intended to be employed in accordance with the National Electrical Code, NFPA 70.
UL857 - Busways And Associated Fittings
This Standard applies to service-entrance, feeder, and branch-circuit busways and associated fittings rated at 600 V or less, and intended for use in accordance with the Canadian Electrical Code, Part 1 (CE Code, Part 1), the National Electrical Code (NEC), ANSI/NFPA 70, and the Mexican Standard for Electrical Installations (Utility), NOM-001-SEDE.
UL870 - Wireways, Auxiliary Gutters, And Associated Fittings
These requirements cover wireways, auxiliary gutters, and associated fittings to be employed in acordance with the National Electrical Code, NFPA 70.
W-B-811 - Busway System, Power, Electrical, 600 Volts
W-C-001124 - Conduit, Raceway, Metal, Conduit, Raceway, Nonmetallic, And Fittings (Underfloor)
W-C-1094 - Conduit And Conduit Fittings Plasic, Rigid (S/S By Ul'S 514B, 514C, 651 And 651A
This specification covers rigid plastic conduit and conduit fittings used for installation of electrical wires and cables.
W-C-415 - Clamp, Electrical (Live Line Connector)
W-C-571 - Conduit & Fittings, Nonmetal, Rigid, (Asbestos Cement Or Fire Clay Cement), (For Electrical Purposes)
W-C-575 - Conduit & Fittings, Nonmetallic, Rigid, Bituminized Fiber, Laminated Wall
W-C-581 - Conduit And Fittings, Nonmetallic, Rigid, (Bituminized Homogeneous Fiber)
W-C-582 - Conduit, Raceway, Metal, And Fitting; Surface
W-C-583 - Conduit Box And Outlet Fittings, Floor (For Rigid Steel Conduit And Electric-Metallic-Tubing Steel)
This specification covers watertight and concrete-tight, cast-metal and pressed steel floor conduit boxes for use with rigid metal conduit (thickwall-type and electrical metallic tubing); and the outlet fittings for use with these boxes.
W-C-586 - Conduit Outlet Boxes, Bodies, And Entrance Caps, Electrical: Cast Metal (S/S By A-A-50563)
This specification covers cast metal conduit outlet boxes, bodies, and entrance caps for use with threaded and threadless rigid conduit intermediate metallic conduit, and electrical metallic conduit.
W-F-406 - Fittings For Cable, Power, Electrical And Conduit, Metal, Flexible (S/S By A-A-50552)
This specification covers box connectors for flexible conduit, armored cable, and nonmetallic sheathed cable, bushings for armored cable, couplings for flexible conduit, adapters for connecting flexible conduit to rigid conduit, and electrical metallic tubing, and clamps for grounding armored cable and ground wire.
W-F-408 - Fittings For Conduit, Metal, Rigid, (Thick-Wall And Thin-Wall (Emt) Type) (S/S By A-A-50553)
W-J-800 - Junction Box: Extension, Junction Box; Cover, Junction Box (Steel, Cadmium, Or Zinc-Coated) (S/S By A-A-59214)
W-J-805 - Junction Box And Cover, Junction Box (Nonmetallic)
W-O-806 - Outlet-Bodies; Iron (Cast Or Malleable), Cadmium Or Zinc-Coated, With Covers And Accessories (For Shore Use) (S/S By W-C-586)
W-O-815 - Outlet Boxes, Nonmetallic, With Covers And Accessories (S/S By W-J-805)
W-O-821 - Outlet-Boxes, Steel, Cadmium Or Zinc Coated, With Covers And Accessories (S/S By W-J-800)
W-P-455 - Plate, Wall, Electrical (S/S By Ul514A And Ul514C)
W-R-32 - Conduit, Raceway, Metal, And Fittings, Surface (S/S By W&C&582)
W-R-36 - Raceway And Fittings, Metallic, Underfloor
This specification covers metallic underfloor duct systems designed for use as raceways for the installation of wires and cables.
W-R-41 - Raceways And Fittings, Nonmetallic, Underfloor
W-R-550 - ( Images) Rod, Ground (With Attachments) (S/S By A-A-55804)
WW-C-00540 - Conduit, Metal, Rigid: And Coupling, Elbow, And Nipple, Electrical Conduit: Aluminum (S/S By Ansi-C80.5 And Ul6)
WW-C-00540 - Conduit, Metal, Rigid: And Coupling, Elbow, And Nipple, Electrical Conduit: Aluminum (S/S By Ansi-C80.5 And Ul6)
WW-C-540 - Conduit, Metal, Rigid, (Electrical, Aluminum)
WW-C-563 - Conduit, Metal, Rigid, Electrical, Thin Wall Steel Type (Electrical Metallic Tubing), Straight Lengths, Elbow, & Bends (S/S By Ul797)
WW-C-566 - Conduit, Metal, Flexible (S/S By A-A-55810)
This specification covers flexible, metal, aluminum or zinc coated steel, electrical conduit for enclosing electrical wires and cables.
WW-C-571 - Conduit, Metal, Rigid, & Coupling, Elbow, & Nipple, Electrical Conduit, Enameled (Replaced By Ww-C-581)
WW-C-581 - Conduit, Metal, Rigid, And Intermediate; And Coupling, Elbow, And Nipple, Electrical Conduit: Steel, Zinc Coated (S/S By Ul6, Ul1242 And Ul514B)
This specification covers steel electrical conduits, conduit couplings, elbows, and nipples of the following types: rigid metal and intermediate metal.
WW-T-00806 - Tubing, Electrical, Metallic
WW-T-806 - Tubing, Electrical, Metallic
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business