[Inch-pound]
A-A-50552
May 31, 1995
SUPERSEDING
W-F-406E
March 26, 1993
COMMERCIAL ITEM DISCRIPTION
FITTING FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL, FLEXIBLE
The General Services Administration has authorized the use of this Commercial Item Description for federal agencies.
1. SCOPE. This description covers box connectors for flexible conduit, armored cable, and nonmetallic sheathed cable, brushings for armored cable, couplings for flexible conduit, adapters for connecting flexible conduit to rigid conduit, and electrical metallic tubing, and clamps for grounding armored cable and ground wire.
2. CLASSIFICATION. Fittings furnished under this specification shall be of the following types, classes, styles, and kinds as specified. Sizes shall conform to standard commercial sizes.
Type I – Box connector, electrical
Class 1 – Flexible steel conduit and round armored cable
Style A – Straight connector, single attachment
Style B – Straight connector, duplex attachment
Style C – 45 degrees (o) angle connector
Style D - 90o angle connector
Kind a – Screw-in internal
Kind b – Screw-in external
Kind c – Clamp 2-screw
Kind d – Saddle clamp 1-screw
Kind e – Set-screw
Kind f – Squeeze
|
Beneficial comments (recommendation, additions, deletions) and any pertinent data which maybe use in improving this document should be addressed to: Commanding Officer (Code 156), Naval Construction Battalion Center, 1000 23rd Avenue, Port Hueneme, CA 93043-4301, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. |
DISTRIBUTION STATEMENT A. Approved for public release, distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business