MIL-PRF-24758A(SH)
1.3 Part or identifying number (PIN). PINs to be used for conduits acquired to this specification are created
as follows:
24758
-
X
M
Prefix for Military
Specification
Size (see code
Specification
number
below)
Nominal ID
PIN Code
(in/mm)
.25 in (6 mm)
A
.50 in (13 mm)
B
.75 in (19 mm)
C
1.00 in (25 mm)
D
1.25 in (32 mm)
E
1.50 in (38 mm)
F
2.00 in (50 mm)
G
2.50 in (63 mm)
H
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they meet all specified requirements cited in sections 3, 4, or 5 of this specification, whether
or not they are listed.
2.2
Government documents.
Specifications, standards, and handbooks. The following specifications, standards, and handbooks
2.2.1
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901
-
Shock Tests, H.I. (High Impact) Shipboard Machinery, Equipment, and
Systems, Requirements For
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-167-1 -
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental
and Type II - Internally Excited)
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Bldg. 4D,
Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
B117
-
Standard Practice for Operating Salt Spray (Fog) Apparatus (DoD adopted)
(Copies of this document are available online at www.astm.org or from ASTM International, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business